• Exceptional workability
• Excellent thixotropy
• Excellent mechanical strength
• Applicabile in layers 10 to 60 mm thick
• Semi-rapid product
• Low modulus of elasticity

Restauro R2 is a rapid, ready-for-use, fibre-reinforced, grey-coloured mortar which is based on special cements, selected aggregate, synthetic resins and special additives. Its high thixotropic nature makes it possible to use the mortar for vertical or ceiling applications, both manually and sprayed with a pump, without leaving sag marks. A slight expansion both in the plastic stage and in the post-hardening stage makes it possible to compensate for shrinkage with considerable improvement in the final adhesion and at the same time avoiding the formation of cracks. The high level of water retention reduces the danger of “burns” when applying thin coats (which, however, must be no less than 1 cm) and during critical climatic conditions (high temperatures and strong winds). In this case, suitable precautions must be taken (avoid direct exposure to the sun, mix with cold 1/4 water, apply the product in the cooler hours of the day when it is not too sunny, etc.). Restoration R2 and particularly suitable for rebuilding balcony pediments, steps, parapets, and for reconstructing the concrete cover in concrete structures degraded by carbonation phenomena or other types of deterioration, provided that the structures have not suffered structural failure (in this case use Structural). It can also be advantageously used to regularize defects in reinforced concrete castings, such as gravel nests of a certain consistency and incorrect positioning of reinforcing bars resulting in their surfacing, provided that such regularizations have the thickness of at least 1 cm. According to EN 1504-9, the scope of Restoration R2 is referable to Principles 3 (Concrete Restoration) and 7 (Preservation and Restoration of Passivity). Restauro R2 is a UNI EN 1504-3 R2 class PCC type hydraulic mortar designed for the non-structural repair of concrete.

• Cortical restoration and reconstruction of cover of concrete and reinforced concrete elements such as beams, columns, septa, floors
• Reconstruction of balcony pediments, cornices, and stringcourses.
• Repair of concrete castings, screeds, precast and noncast elements such as channels, diaphragms, tunnels.
• Regularization of gravel nests, formwork spacer holes, joint shells.
• Consolidation and reinforcement of masonry.