• Outstanding workability and adhesion to the substrate
• Excellent mechanical strength and surface hardness
• Reduced capillary absorption
• Resistant to CO₂ penetration
• Applicable in thickness from 1 to 3 mm
• Perfect degree of finish

Restauro Finitura is a single-component, ready-to-use, grey-coloured cementitious mortar, based on high-strength cements, selected fine-grained aggregates, synthetic resins, fibres and specific additives. Once mixed with water, the result is a mix with excellent workability, good thixotropy, easy to apply with a construction trowel without dripping or scraps. Its excellent water retention reduces the risk of “burning” even in critical climatic conditions (summer temperatures and ventilation); in this case, however, it is necessary to take appropriate precautions (avoid direct exposure to the sun, mix with cold water, apply the product preferably during cooler hours and little sunshine, etc.). The presence of special polymers gives the mortar excellent adhesion to the substrate. Specific additives make the hardened skimming impermeable to water and resistant to CO₂ penetration. Restauro Finitura is a product for the surface repair of concrete structures by means of hydraulic mortar of class C MC IR according to EN 1504-2.

Restauro Finitura is particularly suitable for:

• Surface levelling, even extensive, of cast concrete.
• Finishing of concrete and restored structures with mortars from the Restauro, Strutturale or Colabile lines.
• Finishing cementitious mortars with good mechanical resistance mechanical strength.

In accordance with EN 1504-9, the field of application of the Restauro Finish is referred to in Principles 3 (Concrete restoration) and 7 (Preservation and restoration of passivity) by means of methods 3.1 (Application of mortar by hand) and 7.1 (Increase of cover by addition of cement mortar or concrete).