Balcony – outdoor areas

Although ceramic or stone coverings provide greater weather resistance than other surfaces, frost, rain and sun attack traditional terrace and balcony structures. If the joints become damaged, water penetrates through the cracks and is absorbed by the laying mortar. With frost, the water increases in volume, eventually damaging the structure and chipping and lifting the tiles. Torggler focuses on the system especially for this application. A resin-bonded tile adhesive combined with a highly flexible waterproofing cement mortar guarantee maximum safety.

1. Levelling of the subfloor

Multimix Evo

Quick-setting pre-mixed and fibre-reinforced mortar for restoration, renovation and levelling work both on façades and floors in thickness from 3 to 50 mm. Good adhesion and excellent workability. For manual and machine applications.

2. Waterproofing Tapes

PP Tape 120 mm – 50 m

Polypropylene reinforcement tape with side perforations

Corner Tissue 270°

Reinforcement tissue for open corners.

3. First coat with waterproofing mortar

Flex 2K

Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.

4. Reinforcement net

Rete SSA

160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim coats and for Wall Remedy System.

5. Second coat with waterproofing mortar

Flex 2K

6. Tile adhesive

Tile 480

One-component, improved, high strength, cementitious adhesive, with long open time, deformable, class C2 TE S1 in compliance with EN 12004. For indoor and outdoor use on walls and floors, even for overlaying, for porcelain and glazed stoneware and ceramic tiles of all types and sizes. Frost resistant.

7. Tile joint

Tile Grout 2-15 mm

Cement based powder grout, single component, fl exible and waterproof, classifi ed as CG2 WA in compliance with EN 13888, for fi lling joints 2 to 15 mm wide.

Alternative solution

Tile Epoxy

Two-component epoxy mortar, class R2 T according to EN 12004 and class RG according to EN 13888, for the bonding and grouting up to 15 mm of ceramic, ceramic and glass mosaic, marble and natural stone elements.