Ultimate
Powdered, resin-bonded, flexibilised, high-performance, mould-resistant, waterproof, fast-setting and hardening grout , type CG 2 F W A according to EN 13888, for joints up to 20 mm, with very low emission of volatile organic compounds.
Tiles and Natural Stone Installation
With many years of experience in developing the highest quality adhesives for tile and natural stone installation, Torggler is a reference point in the construction of your flooring system. The wide range of products for bonding and sealing, which comply with European standards, offers guaranteed durability and flexibility to ensure the system’s resistance to abrasion and long-term protection.
Flex
Flexibilizing agent for Aquaproof and cementitious adhesives.
Multigrip
Multigrip is a single component, adhesion promoting primer, based on a styrene-acrylic resin water based emulsion and selected aggregates.
Tile Primer
Improved adhesion, absorption and insulation pretreatment for the installation of tiles on gypsum, anhydrite and cementitious substrates.
Tile Cleaner
Acid detergent for ceramic tiles.
Tile Epoxy Cleaner
Special cleaner for epoxy grouts.
Tile 2020
Highly deformable, quick-setting, lightened cementitious adhesive for tiles, porcelain stoneware, stones and large marble.
Tile 900
One-component cementitious adhesive, type C2 E according to EN 12004, flexible and waterproof, for laying all types of ceramic tiles, including large tiles, for walls, floors and paving. Ideal indoors for waterproof applications in bathrooms and kitchens but also outdoors and on all kinds of substrates. Frost resistant.
Tile 700
Improved one-component cementitious adhesive type C2 E S1 according to EN 12004, quick setting and hardening, highly flexible and high strength, for gluing wall, floor and paving slabs or blocks of marble or natural stone and ceramic tiles of all kinds. Can be used indoors and outdoors. Frost resistant.
Tile 600
Single-component, adhesive cement powder, type C2 FE to EN 12004, quick setting and hardening, flexible and high strength, for gluing over old tiles or surfaces. For indoor and outdoor applications. For ceramic wall and floor tiles of all types. Frost resistant.
Tile 480
One-component, improved, high strength, cementitious adhesive, with long open time, deformable, class C2 TE S1 in compliance with EN 12004. For indoor and outdoor use on walls and floors, even for overlaying, for porcelain and glazed stoneware and ceramic tiles of all types and sizes. Frost resistant.
Tile 350
Improved, single-component, cementitious tile adhesive, type C2 TE according to EN 12004. Anti-slip, flexible, high resistance. Can be used indoors and outdoors, for walls and floors, even over old tiles. Suitable for porcelain and glazed stoneware and all ceramic tiles. Frost resistant.
Tile 250
Improved, single-component, cementitious tile adhesive, type C2 TE according to EN 12004, antislip and flexible, for gluing porcelain or glazed tiles of medium size. Can be used indoors and outdoors, on walls and floors. Frost resistant.
T 480
A deformable cement adhesive for all sizes of porcelain stoneware tiles and glazed tiles. Even for overlap. For indoor and outdoor use also on substrates subject to movement.
T 250
Single-component powder cementitious tile adhesive, type C2 TE according to EN 12004, flexible, non-slip and with extended open time, for bonding all types of ceramic tiles of medium/small size, both indoors and outdoors, to walls and floors.
T 50
Cementitious adhesive for laying absorbent ceramic tiles, indoors and outdoors. Suitable for single-fired and double-fired ceramic materials and aerated concrete materials. It can also be used as thin-layer masonry mortar.
Tile Grout ≤8 mm
Cement-based powder grout, classified as CG2 WA in compliance with EN 13888, for rigid filling of joints up to 8 mm.
Tile Grout 2-15 mm
Cement based powder grout, single component, fl exible and waterproof, classifi ed as CG2 WA in compliance with EN 13888, for fi lling joints 2 to 15 mm wide.
Tile Grout 5-15 mm
Cement-based powder grout, classified as CG2 to UNI EN 13888, for filling joints 5 to 15 mm wide.
Tile Epoxy
Two-component epoxy mortar, class R2 T according to EN 12004 and class RG according to EN 13888, for the bonding and grouting up to 15 mm of ceramic, ceramic and glass mosaic, marble and natural stone elements.
