Flex PU Catalyser
Additivo accelerante utilizzato con le membrane impermeabilizzanti poliuretaniche liquide Flex PU.
Waterproofing
Our waterproofers prevent damage from moisture – because a simple silicone joint does not replace a complete waterproofing. Be it in the sanitary area as well as on the roof or in the basement. Our products help your building to stay dry, because in the worst case, moisture can lead to permanent damage.
Flex PU Primer 2K
Water-based, rigid and transparent epoxy primer. Used as a primer in waterproofing, sealing and floor coating applications on non-absorbent surfaces.
Flex PU Primer
A solvent-based, transparent, rigid, deep-penetrating, fast-drying polyurethane primer.
Primer Aquatech
Aquatech waterproofing liquid sheath primer.
Flexistar
Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.
Flexistar Rapid
Single component, flexible, fibre-reinforced, cementitious, polymer waterproofing membrane with fast hardening.
Aquaproof
Fine waterproofing mortar.
Flex 1K
Single-component, flexible, fibre-reinforced, waterproofing cementitious mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates.
Flex 2K
Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
Stop
Very fast-setting pre-mixed mortar.
Promural Silicon
Transparent, ready-to-use hydrophobising impregnating agent based on siloxane polymers dissolved in solvent, type H for PI, MC, IR according to EN 1504-2, for the protective treatment of absorbent mineral substrates.
Emulsione Epossidica 723
Protective, water-based, type C, two-component epoxy resin paint, according to EN 1504-2.
Epoxy
Two-component epoxy protection coating.
Aquatech
Single-component liquid waterproofing sheath in water emulsion.
® Rapid>Aquatech® Rapid
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for exterior and interior waterproofing.
Flex PU
Liquid polyurethane membrane with high permanent elasticity, used for long-lasting waterproofing based on pure hydrophobic elastomeric polyurethane resins, which provide excellent mechanical, chemical, thermal, UV and natural resistance.
Flex PU Walk
Polyurethane, pigmented, UV-resistant, colour-stable coating with high permanent elasticity, used as a top coat for protecting exposed polyurethane waterproofing coatings. Particularly suitable for pedestrian areas.
Flex PU Drive
Polyurethane, pigmented, abrasion-resistant, semi-rigid, colour-stable and UV-resistant coating used as finishing for the protection of exposed waterproofing coatings subject to high abrasion conditions, particularly suitable for public areas and driveways.
Flex PU Detail
Liquid, permanently elastic, thixotropic, fibre-reinforced polyurethane membrane for complex spots and details.
Asfredol 1000
Cold asphalt, composed of an anionic bituminous emulsion, free of organic solvents, for waterproofing and surface protection of porous surfaces, both wet and dry.
Asfredol 2000
Resin-bonded cold bituminous emulsion ready to use.
Sitol A
Bituminous, waterproofing and anti-corrosion paint.
Black Hydro Easy
Multipurpose, thixotropic, bituminous liquid waterproofer made up of inert fillers, elastomeric resins and additives. Suitable for waterproofing earth retaining foundation walls. Used as sealant and finisher for roof waterproofing and insulation panel bonding applications.
Black Hydro Light
Elastomeric bituminous waterproofer lightened with rubber granules for waterproofing horizontal and vertical concrete and brick surfaces.
Black Hydro Pittura
Solvent-based protective and decorative paint, based on bitumen, aluminium paste, selected synthetic resins and special additives.
Black Hydro Poly 1K
Single component, polymer-modified bituminous thick coating.
Black Hydro Poly 2K
Bicomponent, polymer-modified, bituminous thick coating.
Black Hydro Spray
Solvent-based bituminous waterproofing protective sealant in spray can, suitable on any type of substrate.
BW 100
Bituminous liquid waterproofer.
BW 200
Multi-function bituminous waterproofer.
PP Tape 120 mm – 50 m
Polypropylene reinforcement tape with side perforations
BU Tape
Butyl reinforcement tape.
Shower Tape
Self-adhesive shower/bathtub connection tape.
Corner Tissue 90°
Reinforcement tissue for closed corners.
Corner Tissue 270°
Reinforcement tissue for open corners.
Floor Collar
Self-adhesive butyl collar for floor drains.
Mat 1000 mm – 30 m
Waterproof membrane.
Band 140 mm
Waterproof membrane in tape format.
Bridge Mat 1000 mm – 50 m
Desolarizing waterproof membrane.
Safe Tape 40 mm – 10 m
Cut-resistant tape.
Flex Pipe Collar 22 – 37
Collar for through-hose with flexible reinforcement.
Flex Pipe Collar 50 – 75
Collar for through-hose with flexible reinforcement.
Flex Pipe Collar 93 – 146
Collar for through-hose with flexible reinforcement.
Geotex
Non-woven polyester geotextile (60 g/m2) used as reinforcement in conjunction with Flex PU liquid waterproofing membranes.