CA Poly

• CE marked with European Technical Assessment (ETA) for anchorages on hollow brickwork
• CE marking with European Technical Assessment (ETA) for anchoring in non-cracked concrete in conjunction with threaded rods
• Suitable for anchoring on solid and semi-solid masonry, brickwork and aerated autoclaved concrete blocks
• Rapid setting up
• Easy penetration into porosity and hollow areas
• Secure fixing without expansion and without tension in the substrate

Two-component polyester resin-based chemical anchor without styrene for fixing medium-light loads on un-cracked concrete, solid and perforated brick masonry and autoclaved cell concrete. It can be used in combination with threaded rods in common carpentry, where there is a need for quick commissioning.

Combined with threaded rods, it is used in many construction site applications for fixing elements of medium weight, connected to light carpentry, where there is the need for rapid commissioning without creating tension in the substrate: installation of shading elements, shutters, windows, doors, air conditioners, fences, antennas, alarm systems, lighting fixtures, advertising signs. Thanks to its styrene-free chemistry it can be used in closed environments as well. The product is approved for fixings with anchorage depths ranging from 6 to 32 cm thereby allowing for a highly flexible use, up to twenty times the diameter of the threaded rod.
The temperatures of the substrate during installation range from 0 to +30 °C.
The certified operating temperatures are within the ranges:

• from -40°C to +40°C with a maximum long-term temperature of 24 °C
• from -40°C to +50°C with a maximum long-term temperature of 40°C