• Excellent workability
• Excellent finish
• Quick setting
• Non-shrink
• Applicable in thicknesses up to 40 mm

Rinnova is a single-component thixotropic, cement mortar, ready for use. It is fast setting, non-shrink and fibre-reinforced, based on a mix of special cements, selected fine aggregates, synthetic resins, fibres and specific additives. The mix obtained after mixing with water is characterised by an excellent thixotropic nature and workability, which is very easy to use both for smoothing and for repairs and applications with thicknesses of up to 40 mm. A slight expansion during both the plastic and the post-hardening phases compensates for hydraulic shrinkage, with a considerable improvement of the final adhesion characteristics, and at the same time preventing fracturing. The optimum water retention reduces the risk of “burning” in the case of applications such as smoothing and, if suitable care is taken, even during critical weather conditions (summer temperatures and windy); however, in this case it is necessary to adopt suitable precautions (do not expose to direct sunlight, mix with cold water, apply the product preferably at coolest times of the day and in the shade, etc). The quick setting enables repairs and smoothing to be performed quickly. Rinnova is a product for the non-structural repair of concrete structures using hydraulic mortar type CC and class R2 in accordance with UNI EN 1504-3, and for the protective coating of concrete surfaces type C, MC and IR principles in accordance with UNI EN 1504-2.

• Reconstruction of corners and edges of concrete structures.
• Rapid smoothing of cast concrete surfaces.
• Repair and smoothing of concrete floorings.
• Repair and smoothing of string courses, fronts of balconies and terraces.
• Smoothing and finishing of surface defects of concrete casting (concrete segregation, formwork spacer holes, etc.).