Bond & Finish

• Highly adhesive to the support surface
• Excellent workability
• Hardening with reduced stress
• High water vapour diffusion
• Attainable thickness of 2-5 mm
• Smooth finish

Bond&Finish is a premixed mortar made with special hydraulic binders, selected aggregates and polymers, with excellent breathability and high adhesive strength, GP CSIV W2 classified according to EN 998-1. For the laying and bonding of calcium-silicate panels, as well as for the subsequent finishing operation and smoothing of fiberglass reinforcing mesh. An extremely workable mix is created when the product is mixed with water. The mix is very easy to apply using a trowel, plastering trowel, or a straight edge, even vertically and/or overhead, without sagging or waste, and ensures excellent adhesion to the substrate and the panel. Bond&Finish has very low tension and therefore can even be applied at a greater thickness and prevents hairline cracking.

Renovation of mineral-based walls and ceilings in buildings, in areas affected by rising damp, saline efflorescence, areas subject to microbiological growth and the formation of mould.