Umatixo

• Rapid hardening and development of mechanical strength
• Excellent water impermeability
• Resistant to the penetration of CO₂
• Withstands freezing/thawing cycles
• Resistant to thawing salts

Umatixo is a one-component cement mortar, pre-mixed, with fast setting and hardening, available in anthracite colour, based on a mix of special cements, selected aggregates, fibres and specific additives. A thixotropic and cohesive mix is obtained after mixing with water. A slight expansion during both the plastic and the post-hardening phases compensates for hydraulic shrinkage, with a considerable improvement of the final adhesion characteristics, and at the same time preventing fracturing. The optimum water retention reduces the risk of “burning” when applied in small thicknesses (which, in any case, must not be less than 2 cm) and, if suitable care is taken, even during critical weather conditions (summer temperatures and wind); however, in this case it is necessary to adopt suitable precautions (do not expose to direct sunlight, mix with cold water, apply the product preferably at coolest times of the day and in the shade, etc). Specific additives make the hardened mortar impermeable to water and resistant to the penetration of CO₂. Umatixo is a product for the structural repair of concrete structures using hydraulic mortar type CC and class R4 in accordance with EN 1504-3

• Fast fixing of manhole covers, wells and drains, even at a significant slope.
• Fast fixing of poles, road signs and street furniture.
• Fast repair of interior and exterior concrete flooring.