Clean
Vinyl resin-based paint for interior wall surfaces, highly breathable and anti-mould function, ideal for renovating mould-prone rooms such as laundries, bathrooms and kitchens.
Vinyl resin-based paint for interior wall surfaces, highly breathable and anti-mould function, ideal for renovating mould-prone rooms such as laundries, bathrooms and kitchens.
- High breathability
- Good yield
- High coverage
- Long-term anti-mould function
Application areas
Choose Clean for
New, seasoned, uniform wall surfaces, finished to civil standards.
Cementitious wall surfaces, bastard mortar, smoothed with stucco, already painted.
Discover more
Other solutions you might be interested in
Finish Calce
Finish Calce is a lime-based paint with outstanding water vapour…
Finish Calce is a lime-based paint with outstanding water vapour permeability, resistance to mould and bacteria, adhesion to the substrate and stability over time.
Finish Silikat
Interior wall paint based on potassium silicate, inorganic pigments, selected…
Interior wall paint based on potassium silicate, inorganic pigments, selected aggregates, micronised calcium carbonate and stabilising additives.
Wash
Matt low-emission vinyl resin paint for interior wall surfaces, washable,…
Matt low-emission vinyl resin paint for interior wall surfaces, washable, very high coverage and filling, ideal for masking imperfections in the substrate.
Mineral Skin
White, hydrophobised, mineral coating for interior walls as well as…
White, hydrophobised, mineral coating for interior walls as well as for facades on priming plaster and insulation panels.
Breathe
Vinyl resin-based paint for interior wall surfaces, highly breathable ideal…
Vinyl resin-based paint for interior wall surfaces, highly breathable ideal for areas exposed to condensation such as bathrooms and kitchens.
Skin Acryl
Acrylic protective coating with compacted skim effect.
Acrylic protective coating with compacted skim effect.
Finish Siloxan
Smooth siloxane paint with lotus effect.
Smooth siloxane paint with lotus effect.
Skin Siloxan
1.0 / 1.2 / 1.5 mm siloxane-fibre-reinforced coating with a…
1.0 / 1.2 / 1.5 mm siloxane-fibre-reinforced coating with a skimmed appearance.
Finish Acryl
Quartz-based acrylic paint for exterior wall surfaces with high filling…
Quartz-based acrylic paint for exterior wall surfaces with high filling power. Water-repellent, contains special anti-algae and anti-mould protective film.
Skin Acriloxan
Fibre-reinforced acryl-siloxane coating with compacted skim coat effect.
Fibre-reinforced acryl-siloxane coating with compacted skim coat effect.
Consolida
Highly penetrating water-based levelling and consolidating fixative.
Highly penetrating water-based levelling and consolidating fixative.
Primer VIP
Universal pigmented primer with high filling and masking power, suitable…
Universal pigmented primer with high filling and masking power, suitable for application of paste coatings on plasters, reinforced skim coats and eTics systems.
Details
Instructions for use
Dilution and preparation of the product with water
- Brush application: max 35% by volume
- Roller application: max 25% by volume
The product does not guarantee ease of application and spreading if used ready to use or excessively diluted.
Application tools
- Brush: synthetic bristles
- Roller: short pile/smooth pile
Application cycle – interior walls
Thoroughly clean the surface, fill any imperfections, sand and dust.
Apply one coat of water-based acrylic fixative, suitably diluted.
After 4-6 hours, apply at least two coats of CLEAN.
Application conditions
- Environmental and substrate conditions: the substrate must be dry, free of dust and grease.
- If overcoating (touch-ups) is necessary, it is recommended to apply the product, correctly diluted, with a short-pile roller. Following these application conditions will ensure maximum colour uniformity.
- Ambient temperature: min. +10°C / max. +35°C
- Relative ambient humidity: < 75%
- Substrate humidity: < 10% R.H.
Known incompatibilities
None. For any use other than that indicated in this technical data sheet, please contact our Technical Service.
Tool cleaning
With water.
Safety precautions
- Keep the container tightly closed and protected from frost.
- Safety information for users is contained in the relevant safety data sheet.
- Empty containers or containers with slight traces of dried product film must be disposed of in accordance with local regulations.
Warnings
Start from the corner furthest from the light source in the room and apply the product from the top of the wall, working downwards.
Close the jar immediately after use.
Store the product in its original packaging at a temperature between +5 °C and +35 °C.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| White | 8351 | bucket | 14 l |
33 buckets
|
|
Interior
New, seasoned, uniform wall surfaces, finished to civil standards.
Cementitious wall surfaces, bastard mortar, smoothed with stucco, already painted.
| Test parameter and method | Value |
| Density ISO 2811-1 at +20°C and 60% relative humidity | approx. 1.815 g/ml |
| Brookfield viscosity ASTM D 2196 at +20°C and 60% relative humidity | approx. 15,500 cps |
| Recommended dry thickness ASTM D 1186 at +20°C and 60% relative humidity. | 40–60 microns per coat |
| Flash point UNI 8909 at +20°C and 60% relative humidity. | Non-flammable |
| Storage life UNI 10154 at +20°C and 60% relative humidity. | At least 24 months |
| Water vapour diffusion WDD ISO 7783-2a +20°C and 60% RH | >150 g/m² in 24 hours High |
| Resistance to water diffusion SD ISO 7783-2 at +20°C and 60% relative humidity | <0.1 m (film thickness 100 microns dry) |
| Contrast ratio UNI 11271a +20°C and 60% relative humidity | 99.0 Excellent |
| Brilliance UNI 9389 at +20°C and 60% relative humidity | < 5 (85°) Very Opaque |
Consumo per mano: 12 – 14 m²/l
Still missing information?
Contact our team for personalized support and product guidance.