Home / Xtreme Grip Vinylester / Anchoring and Mounting / Xtreme Grip Vinylester

Anchoring and Mounting

Xtreme Grip Vinylester

Two-component vinylester resin-based chemical anchor without styrene for structural fixings on cracked/un-cracked concrete, solid and perforated brick masonry, wood.
ETA_web Émissions dans l’air intérieur A+ Sisma
  • CE marked and qualified according to the European Technical Assessment (ETA) for anchors on cracked and non-cracked concrete
  • Certified for works in seismic category C1 and C2.
  • Also suitable for fixings on hollow elements, solid masonry and timber
  • Quick commissioning
  • Suitable for use on wet substrates or with flooded hole
  • Substrate temperatures during installation: from -10 °C to +40 °C
  • Fire resistant up to maximum R240
  • Possibility of sinking the anchoring hole to a depth of up to 1 metre
  • Easy penetration into porous and hollow areas
  • Secure fastening without expansion and without tension in the substrate

Two-component, styrene-free, vinylester resin-based chemical anchoring agent for structural fixing of heavy loads on cracked/non-cracked concrete, solid and hollow brick masonry, timber. Thanks to its fast hardening, it can be used where there is a need for quick commissioning and in any case for anchors with a sinking depth of up to 1 metre. It can be applied even if the temperature of the substrate reaches critical values (-10 to +40 °C). In case of wet substrates and with flooded hole, the certification includes the use of threaded rods and in any case the loading time will be double. The product, depending on the diameter of threaded rods or improved adhesion rods used, is qualified according to the European Technical Assessment (ETA) for applications on cracked concrete (option 1), non-cracked concrete (option 7), even if the work falls under seismic category C1 C2.

Combined with threaded rods or improved adhesion rods, it can be used for many cases of heavy load fastening or where, due to the presence of critical temperatures (< 0 °C or > 30 °C), the use of other types of anchors is impossible. Thanks to its styrene-free chemistry it can be used in closed environments as well.

  • Metal frames and constructions in general
  • ventilated façades
  • emergency stairs
  • canopies and cantilevered fixings in general
  • lifts, elevators and lifting fixtures
  • lifelines
  • airtight/watertight barriers
  • gangways
  • seismic area consolidations
  • attic/floor reinforcements
  • concrete casting joints with post-installed joint irons
Code Bicomponent Packaging Packaging size Pallet Barcode
8051 2 components cartridge 12x300 ml 52 cardboards 8030334080517
8052 2 components cartridge 12x400 ml 72 cardboards 8030334080524